Comprehensive Guide to Installing the True Flow Intake System

May 23
02:50

2024

Andrew Bernhardt

Andrew Bernhardt

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Upgrading your vehicle's performance with a True Flow intake system is not only straightforward but also highly beneficial. This guide provides a detailed, step-by-step process to help you install your new intake system efficiently.

Why Choose True Flow Intake Systems?

Before diving into the installation process,Comprehensive Guide to Installing the True Flow Intake System Articles it's essential to understand why True Flow intake systems stand out. True Flow air intake systems are designed to enhance your vehicle's performance by optimizing airflow while maintaining the factory air box. This design keeps the airflow cooler and protects the filter from debris and moisture. The factory filter is replaced with a high-flow, foam, lifetime filter from True Flow. Additionally, the restrictive factory air tube is swapped out for high-flow, powder-coated, mandrel-bent tubes and reinforced silicone couplers, ensuring maximum velocity.

Key Benefits of True Flow Intake Systems

  • Enhanced Performance: True Flow systems improve horsepower and torque by optimizing airflow.
  • Durability: The high-flow, foam filters are designed to last a lifetime.
  • Ease of Installation: No modifications are needed, and all factory breathers, sensors, and hoses remain intact.

Installation Process

Installing a True Flow intake system is a straightforward process that can be completed with basic tools. Here’s a detailed guide to help you through the installation:

Tools Required

  • Socket set
  • Screwdrivers (flathead and Phillips)
  • Pliers

Step-by-Step Installation

  1. Remove the Stock Intake System:

    • Disconnect the negative battery terminal to ensure safety.
    • Remove the factory air box and intake tube. This may involve loosening clamps and disconnecting sensors and hoses.
  2. Prepare the True Flow Intake System:

    • Assemble the True Flow intake components as per the instructions provided in the kit.
    • Ensure all parts are clean and free from debris.
  3. Install the New Intake System:

    • Position the new intake tube and filter in the stock mounting locations.
    • Secure the intake tube with the provided clamps and hardware.
    • Reconnect any sensors and hoses to the new intake system.
  4. Final Adjustments:

    • Double-check all connections and clamps to ensure they are tight and secure.
    • Reconnect the negative battery terminal.
  5. Test the Installation:

    • Start the engine and listen for any unusual noises.
    • Take the vehicle for a short test drive to ensure everything is functioning correctly.

Interesting Fact

Did you know that one of the reasons stock air intakes are so restrictive is to reduce engine noise? By replacing the stock intake with a high-flow system, you might notice a slight increase in engine growl. However, this noise is not overpowering and will not interfere with conversations or music.

Performance Gains

Upgrading to a True Flow intake system can result in noticeable performance improvements. According to Car and Driver, aftermarket air intake systems can increase horsepower by 5-20 HP, depending on the vehicle and other modifications.

Additional Tips

  • Maintenance: True Flow filters are designed to be reusable. Regular cleaning and maintenance will ensure optimal performance.
  • Compatibility: Ensure the intake system you purchase is compatible with your vehicle's make and model.

Conclusion

Installing a True Flow intake system is one of the most effective and straightforward ways to boost your vehicle's performance. With just a few tools and about 30 minutes of your time, you can enhance your engine's efficiency and enjoy a more responsive driving experience. For more detailed information on performance gains and other benefits, check out MotorTrend.

By following this guide, you can confidently upgrade your vehicle's intake system and enjoy the benefits of improved performance and efficiency.