Application and Introduction of High Frequency Straight Seam Welded Pipe in Automobile

The main types of automotive high frequency straight seam welded pipe car silencer tube, drive shaft with the tube, thrust tube, condenser tube, exhaust pipe and control shaft with the tube, shock absorber storage tube. Seamless steel is the production of semi-axle casing and axle axle axle drive axle of the primary information. Cantilever tube for the chassis rear axle, chassis front axle assembly with steel pipe shaft casing, bearing casing, brake pedal tube. Cooling air conditioning system with the first tube cooling water pipes, air conditioning with the tube, the sensor tube. Steering shock absorber with special needs steel pipe with cylinder steel pipe, storage tube with steel pipe. Hollow shaft tube for the transmission system. The seat tube is mainly used for seat layout. Ultra-high strength steel pipe for side doors.

High frequency straight seam welded pipe plate by the vertical plate, plate, large round steel plate composition. This layout of the valve plate, pad plate can be directly under the control of forming, and small square steel is the need for technical workers first calculate the cutting scale, and then according to the needs of the curvature of the tire made tire with a small Square plate suppression forming, the central part of the valve plate is curved, the edge of a non-plane, then it needs to do a standardized valve, it is necessary to do a tire, or can not press out the required shape. Link butterfly valve butterfly valve with the old volume, weight Shen, action agility, loading and unloading lunch and other advantages.

Its characteristics are: welding speed, welding heat affected area is small, the welding of the workpiece can not clean up, can be welded thin-walled tube, can be welded metal pipe. High frequency straight seam welded pipe connecting rod butterfly valve mainly by the drive equipment, valve plate, valve body, spindle, rod and other components. The opening and closing of the valve does not rely on the drive to install the drive shaft to activate the bar to organize the movement, and then finish the opening and closing of the valve plate. Regardless of the valve is closed by the non-closed time, the valve plate and its moving parts have been non-media among the double. When the valve is closed, the valve plate to accept the full pressure of the media, and then make it even static pieces lead to deformation; valve when the valve is closed, the valve plate will be washed by the media, and the media caused by the valve plate itself oscillation.