High-pressure Boiler Seamless Steel Pipe

High pressure boiler seamless steel tube is a kind of boiler tube, which belongs to the seamless steel tube category. The manufacturing method is the same as the seamless pipe, but there are strict requirements on the steel type used for manufacturing the steel pipe.

High-pressure boiler seamless steel tubes are often under high temperature and pressure when used. The tubes will be oxidized and corroded under the action of high temperature flue gas and water vapor. It is required that the steel pipe has high durability, high resistance to oxidation and corrosion, and good structural stability. High-pressure boiler seamless tubes are mainly used to manufacture superheater tubes, reheater tubes, air ducts, and main steam tubes for high-pressure and ultra-high-pressure boilers.

Low and medium pressure boiler tubes GB3087-2008, seamless steel tubes for high pressure boilers GB5310-1995 are used to manufacture low temperature and high pressure boiler superheated steam pipes, boiling water pipes and locomotive boiler superheated steam pipes, large smoke pipes, small smoke pipes Hot-rolled and cold-drawn (rolled) seamless steel tubes of high-quality carbon structural steel for arch brick pipes. Structural seamless steel tubes (GB / T8162-2008) are seamless steel tubes for general and mechanical structures.

Specifications and appearance quality: GB5310-95 "Seamless Steel Tubes for High Pressure Boilers" The outer diameter of hot-rolled tubes is 22 to 530mm, and the wall thickness ranges from 20 to 70mm. Cold-drawn (cold-rolled) pipe has an outer diameter of 10 to 108 mm and a wall thickness of 2.0 to 13.0 mm.

The special-shaped seamless steel pipe is a general term for seamless steel pipes of other cross-sectional shapes other than round pipes. According to the different shapes and sizes of the steel pipe section, it can be divided into equal-wall thickness shaped seamless steel pipes (code D), unequal-wall thickness shaped seamless steel pipes (code BD), and variable-diameter shaped seamless steel pipes (code BJ). Shaped seamless steel tubes are widely used in various structural parts, tools and mechanical parts. Compared with the round pipe, the special-shaped pipe generally has a larger moment of inertia and a section modulus, and has a greater resistance to bending and torsion, which can greatly reduce the structural weight and save steel.