How to Maintain ESD Flooring?

The key to success lies in finding the right cleaning solution because many solutions leave mineral accumulations or insulative dirt from the mop water due to which you get to see a dull looking ESD floor. With time, this dirt accumulation causes the electrical performance of the tiles to reduce substantially, impacting the floor’s static control capacity in a negative manner. You will not only have to spend more money on deep cleaning but will also have to face rejection in ESD audits. The market is filled with cleaners for ESD floors and therefore, it becomes necessary to choose the right one for your needs.  

Once the ESD tiles have been installed, no mopping or scrubbing should be done for approximately 48 hours. Some experts are of view that machine scrubbing or washing should not be done for at least five days after the installation. This is necessary to allow the heat welds and adhesive to set properly. It will also reduce the chances of moisture interfering with the adhesive.

According to experts, the tiles need to be cleaned properly before being released for public use. However, when cleaning, make sure you are not flooding the tiles with excess water or cleaning solution because if moisture reaches beneath the tiles, it will cause damage to the adhesive.

The surface should be swept or vacuumed before applying a damp mop soaked in a mild, neutral pH cleaning solution. It is strictly prohibited to use acidic or alkaline cleaners or any other cleaner that contains solvents or oils. Once the mopping is done, warm water should be used to rinse the floor. This water can be easily removed with the help of wet/dry vacuum and it should be exposed to traffic only when the floor is completely dry.If you are not sure about the cleaning solution, it is recommended to check its performance on an inconspicuous area before applying it on the entire floor. Don’t Skip CleaningRemember, cleaning of ESD flooring is extremely important because insufficient cleaning will not only reduce the wear life of the floor but also bring down ESD properties. Therefore, timely maintenance is necessary. How frequently you need to clean the floor depends on the amount and type of traffic the floor will be exposed to. When to Perform Dry Buffing?You can perform dry buffing on a regular basis after wet cleaning. This will help in maintaining the luster of the surface. Always remember to remove dirt particles with the help of vacuuming, dust mopping or sweeping before dry buffing.  Whether you wish to buy ESD vinyl tiles or Gamma heterogenous multilayered vinyl tiles, always choose a reputed manufacturing company. Summary Be it ESD flooring or Gamma heterogenous multilayered vinyl tiles, it is strongly recommended to choose a reliable manufacturer.