Packaging as a professional, with smart packaging methods

Sep 24
16:23

2019

Georgetech

Georgetech

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Kitchen packaging will look like a toy. Protect and pack the fragile items of your kitchen with the following methods and with little care to transport them, they will reach your new home safely.

mediaimage

How do I pack dishes?

Preparing the carton: Select a medium-sized carton and align the bottom with crumpled wrapping paper.

Cover the plate: Place the plate in the center of the wrapping paper. Grab an angle of multiple sheets of paper at a time and pull it over the plate. It should be fully covered.

Stack and Cover: Place a second plate over the first and,Packaging as a professional, with smart packaging methods Articles clockwise, grasp the next corner of the paper and pull it over the second plate. Place a third plate. Grab the other two corners and fold up the plate as you did with the first two corners. For smaller dishes, you can stack larger quantities together. As a rule, stacks should not exceed the diameter of the plate.

Wrap: Turn the wrapped stack of plates upside down on your paper. Wrap all dishes together. Start with a corner of the wrapping paper and pull two sheets over the plates. Cover the beam again by pulling the next corner, then the third corner and then the fourth. For non-fragile dishes, you can pack five or six in a stack. Μεταφορες Αθηνα.

Packaging: Seal the stack with a wrapping tape and place it in a carton so that the plates stand apart.

Glass bowl packaging

Position: Load a cup (-pol) to one corner of the wrapping paper. Pull the nearest corner of the paper over the cup.

Add another glass: So create a "nest" for a second cup, next to the first cup, with the paper between the two.

Pull and Wrap: Pull the two side corners up, one by one, and press into the second cup.

Roll and Pack: Hold the two cups together and roll them to the other corner. Place the cups (-poles) vertically, with the top of the glass down, near the top of the carton. Do not stack heavy objects above them.

Packaging of glass beads

Fill the Glasses: Before wrapping the glass, fill them with wrapping paper.

Wrap: Place the glass in the corner of the wrapping paper and roll with one or two full turns (depending on size). Bring the sides of the wrapping paper to the glass and continue to roll it over the opposite corner of the paper you just brought. You can use bubble wrap if you want extra protection.

Packaging and label: Place the glasses towards the top of the box (Place heavier objects - plates, jugs, etc. - down). They should be positioned vertically, with the top of the glass facing down, - never horizontally. As you pack each layer of a carton, wrap crumpled wrapping paper in the gaps for greater security. Add a brittle label to the carton, as well as what it contains.

Categories: