How to Fix Audio Errors

Turning on your computer to listen to your favorite song only to meet errors with your audio devices is not rare. If your speakers are not working as necessary, chances are, the device may be faulty. In many cases, however, you will discover that the source of the malfunction is not the hardware, but errors with some configurations as well as outdated drivers or corrupted DLL files. Because experiencing the problem can disrupt your supposedly worthwhile time, consider getting it repaired as soon as possible.

What Are They?

An error with sound is an issue with the main audio source in your computer. As well as many people claim that it only boils down to not having an output device installed, the problem can range from poor quality sounds and non-adjustable volume levels to the inability of your speakers to produce any sound, at all.

Signs Indicating the Error

Often, you will know that there is an issue of the sort if you cannot hear any sound from your speakers. That or your computer notifies you directly with the message that there could be a problem with your device driver. In any case, unless due to a corrupted file, the error will not cause more damages to your PC if you decide to resolve the issue some other time. However, it can be rather inconvenient - especially if in the upcoming days, you will be attending to an important task to process urgently. Therefore, it is best to have it repaired as soon as you spot the problem.

Causes of the Problem

* Audio codecs are missing

* Audio device is not plugged in correctly

* Audio device driver is not working properly

* Audio device volume is too low

* Disabled audio device in Windows

* Disabled driver support

* HDMI audio is not working

* Muted audio device

* Stopped critical audio services

There are different causes of the problem. Often, however, you cannot hear sounds from your speakers because you failed to set your device to default. Consequently, it will not support automatic playback. Unless you configure the settings manually, each time you would need audio (which can be bothersome and time-consuming), you will keep on experiencing the problem.

When Does the Problem Occur?

Usually, you will not realize you are experiencing errors with your audio until you turn on your speakers to find out nothing is coming out of them. The common response is to assume that there may be an issue with the cables. Especially when it is not often that you stumble upon a faulty s system, you may attempt to fix the problem by tinkering with the cables and if possible, replace the cables.

What It Means to Have the Problem Fixed

To have your system fixed means you will not be experiencing any issues regarding your computer's sound. You can listen to ".wav,.wv", and other files under the category, as well as watch quality videos and movies. Furthermore, once you have the problem repaired, you will not be receiving prompts implying that there is a missing plug-in or that the flash player is not working when you browse the internet.

Tips on How to Fix the Problem

* Adjust your PC's sound settings

* Disable any interfering extension

* Install device codecs

* Test your speakers using different media playback applications

A typical solution to a defective sound system is to conduct a system restore. From the start menu, go to Administrative Tools, then, select System Restore and specify an appropriate restore point. Especially if you have installed new programs and applications, which can result to having your PC's configuration settings modified. Because it enables your system to revert to the time your speakers were functioning fine, using the built-in Windows feature may be the quick fix your computer needs.

Two Ways on How to Fix the Error

Via Taskbar

1. Restart your computer.

2. Notice the sound icon. If it has a red X in the bottom corner, the speakers are off, in which the solution is to turn them on. Otherwise, right-click the icon.

3. Choose Playback Devices.

4. From the window, make sure you select a default sound system.

Via Windows Service

1. Check with Windows Audio Service

2. From the Windows service, go to Windows Audio and choose Properties.

3. There, modify the start-up type to Automatic.

4. Start or run the program.

5. Re-install device drivers directly from the Device Manager.

Turning to a technical specialist is unnecessary if you are experiencing audio error. With the aforementioned tips and step-by-step instructions (granted you follow them accordingly), you can resolve issues yourself. In addition, make sure to update your device drivers so your PC will continue to work fine. Not only is it an excellent preemptive measure, it also maintains your system's stability.