New to SerialGhost data loggers? Þ First, configure the logger: section Configuration Þ Then learn about recording data: section Recording data Þ Then, retrieve the recorded data: section Viewing recorded data Þ Finally, get the most out of your data logger by configuring network communications: section Remote access
The SerialGhost Premium and SerialGhost Wi-Fi Premium are advanced RS-232 and serial bus loggers with a high-capacity internal memory, that may be accessed locally as a USB flash drive, remotely through Ethernet and Wireless LAN, or through USB Virtual COM port. Bidirectional data flowing through the serial bus will be captured and stored on the internal flash drive in a special file. This data may be retrieved by switching to flash drive mode, giving instant access to all captured data. The Ethernet and Wireless LAN functionality allows receiving logged data as E-mail reports, and on-demand via the local TCP/IP network.
The SerialGhost Premium keylogger and SerialGhost Wi-Fi Premium also feature a built-in timestamping module and battery. This enables adding time and date information to the log file. Thanks to the internal battery, the time and date persist even when the device is not powered. The SerialGhost Premium and SerialGhost Wi-Fi Premium do not require any dedicated software or drivers.
Both versions feature Virtual COM port connectivity. The device may be controlled by commands sent over the serial port, allowing accessing the stored data and configuring the device. A special application named KL Tools is delivered free of charge to demonstrate this functionality.
Features
• Logs asynchronous serial transmission (RS-232 compatible)
• Baud rates up to 115200 bps
• Logs 2 streams simultaneously (RX and TX)
• High-capacity internal memory
• Powered from a USB port, or external power supply
• No software or drivers required, Windows, Linux, and Mac compatible
• USB flash drive mode
• Virtual COM port mode
• Ethernet link (RJ-45)
• Time and date stamping (with built-in battery)
• Automatic E-mail reports with recorded data
• On-demand access at any time through TCP/IP
• Background connection to the Internet over a local Access Point (SerialGhost Wi-Fi Premium)
• Support for WEP, WPA, and WPA-2 encryption (SerialGhost Wi-Fi Premium)
Requirements
• Asynchronous serial bus with RS-232 logic levels (+/-12V)
• Operating system with USB Mass-Storage device support
• 5V DC power source (external power supply, or USB port)
• Optionally Wi-Fi compliant Access Point coverage (WPA-2, WPA, WEP64/128, or open network)
• Optionally MS Windows (only for running KL Tools)
