Other Way of Changing Color of Grout Without Removing It

Jul 30
10:22

2012

Ma. Theresa Galan

Ma. Theresa Galan

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

The drawback of tile flooring is the discoloration of tile grout after some time. The grout may have started out white, for instance, but now it approximates the "dirt" color.

mediaimage

In the past there was only one remedy for this sort of situation,Other Way of Changing Color of Grout Without Removing It Articles and that was to remove the existing grout and re-grout the floor. This might still be an option if the floor area is very small, say, under 10 square feet, but there is another way to change the grout color without removing anything. Trying to remove grout is always a mess under the best of conditions. you can refresh your existing tile installation and save the inconvenience and expense of replacing worn out grout or tiled areas.  The results are simply amazing.

The porous nature of grout is basically responsible for this. It easily absorbs moisture, dirt, germs on its surface which make it look stained and discolored. The most effective solution to this problem is to apply grout colorant, also known as grout paint to change its color.

To avoid the mess, you can paint the surface of the grout with a grout "colorant." Colorants are made to match just about any stock grout color available. You can make your grout lighter, or you can make it darker. You can touch up areas to match surrounding areas.

There is a catch to all of this, of course. The job is tedious. Using grout colorant, you must completely cover the grout but not the tiles. If you don't have a steady hand, you will be constantly wiping the product off the edges of the tiles.

Most people use a small brush, approximately the width of the joints or a little narrower. Keep a rag handy, so you can wipe the colorant off the edges of tiles as you go along.

An important step is making sure the grout is clean before you start. Grease and other deposits will preclude the colorant from adhering. Also, you must make sure the grout is completely dry.

If you have cracked or damaged grout, repair it and allow the repair to cure a few days before you begin the coloring process.

There is no doubt that when you want to change tile grout color, you have to work very hard for this project of home improvement but the end result is highly fulfilling. You can maintain this new look of the tile flooring for a long time if you use a good quality dust mop to sweep the floors. Placing area rug in the areas near the entrances can prevent accumulation of dirt into the grout to a great extent.

For more useful and related information of this topic, check the site below:

tile and grout cleaning auckland,tile and grout cleaning northshore