Learning How To Make A Gas Fireplace

Nov 23
12:16

2013

Diana Spencer

Diana Spencer

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

To be able to have a warm, crackling fire in the house, you could personally do a gas log installation South Lake TX. Here are the steps you could fol...

mediaimage
To be able to have a warm,Learning How To Make A Gas Fireplace Articles crackling fire in the house, you could personally do a gas log installation South Lake TX. Here are the steps you could follow.

The first thing that matters is to determine the best position f the fireplace that is why to be able to determine this, you should make a mock plan using the appropriate dimensions and outline. Doing this will help you know the space that will be utilized by the fireplace.

The next step is to build the platform. You could get a flattened pieces of wood and nail them together according to the shape of the hearth.

Another thing that you should do is to prepare the burner pan but you should first turn off the fuel valve in the fireplace and after then you may d the capping off of the burner on the farthest end of the fuel outlet. But you should also wrap in with a rubberized tape or apply paste on its threads before screwing the cap to avoid leaking.

You should then obtain a wrench which will be used in the steady holding of the supply outlet and pliers could be used to remove the cap. You will then be permitted to attach into the outlet the supply line elbow. Make sure that this line is flexible enough and it is based on the standards set for fireplaces.

Now that you have tried attaching the supply line, you should do the proper testing to be able to check if there has been proper attachment and this could be done by turning it on. Then, by applying an ample amount of a mixture of soap and water along the connections, you might be able to observe active bubbling. This should be your hint for any leaks and be sure to repair such.

After doing the appropriate testing, you are then ready to fix the other parts of the system such as the burner bracket for diversion as well as the pilot assembly. Then be sure that you have covered the safety valve with its heat shield. You may then pour on the sand on an even manner in the pan so that you will have more consistent flames for your gas log installation South Lake TX.

After which, you may then be allowed the placement of the rock wool and this is usually included in the supply kit because this is responsible for having burning embers upon heating. The lava rock should also cover the entire floor of the fireplace and the grate should then be place over to complete