4 Typical Automated Door Repair Problems And How To Fix Them

If you are experiencing automated door repair problems then you might want to take note of the most typical things that can go wrong so that you can fix them quickly. These items range from garage doors to swinging doors usually found in offices or retail stores. Identifying the issue might help you to save money when it comes to repairing it.

My Remote Control Will Only Work When I Am Close To The Door

When this happens you will have to check the batteries in your remote. If the batteries are flat then this could be the problem and you will only need to change them to be able to access the doors from a further distance. If there is something blocking the remote from the doors (such as a car windshield) then you might want to try pressing the remote at a different angle to see if this is the problem or not.

My Doors Only Open Halfway And Then They Stop

When this happens the first thing you need to do is check whether something is blocking the doors from opening. If a spring is jammed then it might be preventing the mechanism from working. You should also check to see that the springs are oiled. If the mechanism is old and rusty then it might be hindering the functioning of the opening mechanism and this is a simple procedure to complete in order to help it run smoothly.

My Doors Do Not Open And Close Smoothly

Over time you might begin experiencing automated door repair problems and this can be due to the fact that the bolts loosen over time. In order to resolve this problem you need to make sure that all of the nuts and bolts are properly tightened and then check to see if the mechanism is working once again. In order to make sure that you are tightening the bolts correctly, make sure that the doors are closed when you begin the process.

Rollers that are no longer working can also cause the automated door repair issues. It will get stuck at certain points. In order to make sure that all of the rollers are in good condition you will want to inspect each of them. The easiest way to inspect rollers is to inspect them while moving it up and down.

General Maintenance Problems

If you are having problems with the functioning of your doors then you might want to check for rust. Rust can eat away at precious coils, nuts and bolts and this can cause them to malfunction. If you want to make sure that no future damage occurs then you will want to check thoroughly for rust and replace any parts that are damaged in order to get your mechanism working once again.

Calling In The Professionals

If you have been through your owner's manual and you cannot find the problem then you should call automated door repair professionals to help you find and solve the problem. Automated door repair can be tricky to do by yourself, so make sure your doors are in good hands.