Drywall Installation as a Way to Repair Your Home

Drywall installation is a finishing and construction material used for covering interior walls and ceilings, installation of light partitions. It is suitable for repair and reconstruction of the interior both in apartments with outdated inconvenient designing, and in new homes.

Drywall partition - a simple means of redevelopment, which allows one spacious room to make two. The internal wall from drywall allows:

1. get from one spacious children's room a couple of rooms smaller in size,

2. turn a large living room into two cozy bedrooms,

3. separate the kitchen and dining area.

Drywall installation https://ikhomepros.com/drywall-installation/ is easy for experienced masters and it has a number of other indisputable advantages:

Installation of a partition demands a minimum of time without considerable financial expenses.

1. The light weight of the structure does not create any load on the floor.

2. The construction of drywall partitions is such that the internal free space is an ideal place for pipelines and wiring.

3. The smooth and even surface of the sheets facilitates the processing.

4. Easy dismantling does not damage other elements of the room in case of change of its purpose;

5. Compliance with fire, acoustic and thermal requirements.

How to make a drywall partition

How to make yourself a partition in a plasterboard apartment?

It is easy to install drywall partitions in the apartment. It is enough to buy the necessary materials (profiles and sheets of drywall, as well as sound insulation), prepare the necessary tools, fasteners and get to work.

From profiles the strong basic design gathers. It is lined on both sides with drywall boards and filled with mineral wool.

The next step is to prepare a new partition for further processing, during which you need to plaster all the joints, seams and caps of screws.

The final stage of work - puttying of a new wall with the subsequent painting or pasting of wall-paper.

Drywall partition with your own hands

Use a water level to mark and draw lines on the floor, as well as on the ceiling and walls, using a long ruler or profile. Move the line drawn on the ceiling to the floor using a cord or rope, and then make marks on both walls. Once again, check the accuracy of the leveling lines before making a plasterboard wall.

Remember that these partitions are usually made with doorways to enter an enclosed space. Mark a place on the floor for the doorway where you will install vertical rack profiles for it.

How to make a plasterboard wall - instructions

Installation of drywall partitions involves the construction of a strong frame. The basis of a framework are horizontal and vertical profiles. First, horizontal profiles are mounted along the perimeter of the future partition, and vertical racks are attached to them, to which the sheets of drywall will be fixed.

We build a plasterboard wall, starting with the installation of a horizontal ceiling profile. Press the profile to the ceiling and attach it with a dowel.

Similarly, you need to install the profile on the floor. Proceed to the installation of vertical profiles. Install them so that it is possible to fasten the sound insulation on both sides of the profile.

We make a partition from drywall, paying attention to whether it will exactly lay down on a ready basis. Make sure that the dowel caps do not protrude and that the sheets are installed evenly.

When planning how to make a drywall partition, keep in mind that you can place hangers or shelves on it. To do this, between the vertical rack profiles you need to make jumpers to increase the strength of the structure.

Before making a partition from a profile, mark on a floor a place for a future doorway.

When making calculations, measure not only the size of the door, but also the door frame itself.

1. Lay a horizontal profile on both sides of the marks of the future hole on the floor;

2. At each end of the horizontal guides you need to insert a vertical profile that goes to the ceiling;

3. Use a horizontal jumper to mark the height of the doorway;

4. Before constructing a plasterboard wall, check all measurements with a level;

5. Use wooden bars to fix the doorway jumper in the profile. Bars are strongly fastened to profiles by self-tapping screws;

6. Next, you need to insert the sheets in the prepared frame of the partition;

7. Installation of drywall partitions involves mandatory treatment of sheet joints with insulating tape.

Conclusion

Some basic conclusions on the topic:

Drywall partitions are a convenient way to change the layout of the room without compromising the load-bearing capacity of the main walls, serious financial costs and loss of usable space.

Drywall sheets are an easy-to-use material, so you can work with it if you have some skills.