How to Operate a Napoleon pellet stove

For those people who are looking for a cost effective way to keep their homes warm in the evening or during the cold seasons, then there are numerous options to think about one of them being the use of a wood pellet stove. These stoves are known for their efficiency and they utilize pellets which are made of wood sawdust which makes them very inexpensive. There are numerous companies involved in the manufacturing of the pellet stoves and you can get them easily online. Napoleon pellet stoves are some of the most accepted stoves of this kind and can be purchased from authorized dealers online.

Now, having said that, it is good to understand that although buying a Napoleon pellet stove is not a problem, you need to understand how you should operate them so as to get the best the best out of them. It is however not a hard thing to do if you know what you are supposed to do. The Napoleon pellet stoves come with a manual that you can read and follow the given instructions but there are also materials that you can read or watch videos that are available to have a clear understanding of what you need to do.

When starting a fire in your Napoleon pellet stove, you can use the automatic ignition which is very easy because you only need to press a button to discharge the pellets into the burn chamber and prompt them to ignite. If your stove is supposed to be controlled manually, then you should apply some solid starter material or gels that are supposed to be used for lighting but make sure that you don’t used liquid products. Follow this by lighting the pellets and observe them to make sure that they start burning properly. The flame in the Napoleon pellet stoves is supposed to spread gradually and this is what you should check to establish.

In case your Napoleon pellet stove does not start as it should, the fuel will shut off when you start for a number of times without success. The Napoleon pellet stove is supposed to reach a certain temperature level and if they fail, that is when the fuel flow is shut from reaching the burn chamber. Ensure that the hopper has fuel and that it is being discharged properly. If you stove does not light well after several attempts, seek professional help.

Check the to be sure that there are no adjustments that need to be done on the air inlet or the control panel. If the stove starts well, then you can relax and enjoy long hours of warmth that is generated from it. The modern Napoleon pellet stoves have an integral remote wall thermostat that helps them to respond to your settings as well as the room temperature by going on and off or shifting between a high and  low burn.

Napoleon pellet stoves do not pose any problem to the user if they are maintained and operated well. You only need to adjust the level of combustion air sometimes mostly if you notice a dark smoke or sooty, orange flame. Make sure that you start your stove well and everything else will go well.