Residential Soil Classification Report. Everything you need to know

Feb 4
23:54

2020

Nancy Whitman

Nancy Whitman

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Maybe you have done this before, or this is something that you consider doing. Getting a residential soil classification report.

mediaimage

But,Residential Soil Classification Report. Everything you need to know Articles before you are getting this report, you need to make sure that you are getting as much information about it as possible. To ensure that you know how to read the report, you need to make sure that you understand everything about the soil classification report. This is everything you need to know about the residential soil classification report.

What is the residential soil classification report?

The residential soil classification report is a report about the type of soil and the quality of soil you have on your property. This type of report can be requested when you are considering to build in your property, or when you think that your soil might be the reason for structural damage.

This is a report that you will get after soil testing Brisbane is done, by a geotechnical engineer. This can’t be done by just anyone. And, this isn’t the same as when you are getting soil testing done before you plant flowers and vegetables. The problem is that you need to be able to read and understand the report. Something that might be hard to do.

What is the engineer do as part of the classification report?

The geotechnical engineer is doing a couple of things in order to test the soil correctly. He isn’t just taking samples of the topsoil and test it for the type of soil that your property might have. He is drilling holes into the ground, about three meters down, and then take samples.

Normally, he will take samples of the whole three meters that he has drilled. To see the different layers of soil and to make sure that he is testing all the layers and different types of soil. He is doing this at more than one place on your property. To make sure that you are getting the right results of the soil type that your property has.

Containing inside the classification report

Inside the soil classification report, there will be a short description of the residential site classifications Brisbane, and the visible soil that he has tested. The top soil is laying on top of the property. He will also write about anything important that needs to be known about the site that might have an influence on the type of soil.

Then, he will give the results of the soil testing Brisbane. The exact location of each sample was taken with the required results. Making sure that he and the report reader will know where each sample was taken and what the soil testing results of each location and each level were.

The soil classification summary explained

In your report, you will see that there are some soil classifications that might be hard to understand. It is normally just a letter. These letters have different meanings. These are the normal meanings of the letters you might find on the report.

  • M-D. Moderate clay sites with deep moisture changes
  • H-D. Highly reactive clay with deep moisture changes
  • E-D. Extremely reactive clay sites with deep moisture changes

It is important to get a residential soil classification test done, before you start building, or if you found that you have structural damage to your home. With these tests, you will get a report that will give you possible reasons why your structural damage might have occurred. Or, it gives the builder clues about how he needs to build to avoid any structural damage over time. This is why you should consider getting this done, by hiring a geotechnical engineer before you decide to build on your residential site.

Contact QCTS for soil testing service.