Tips for Cleaning Portable Water Filters Shower Head

In this article, I will mainly provide you the tips for cleaning your portable water filters shower head. I actually tried my level best to make the whole process easier for you but the rest depends on your understanding. Hope this article will surely assist you at the time of cleaning your portable shower filters. 

First of all the thing you need to do is to fill a container with distilled white vinegar. In order to clean your portable shower heads, it’s quite essential for you to manage a large container of distilled white vinegar. For your kind information, this is the only material that you need to use at the time of cleaning your portable shower filters. The most important thing about distilled white vinegar is, it’s quite natural and it’s affordable as well which means you don’t have to spend much for purchasing this item. Mainly the distilled white vinegar is used for water mineralization.

• Well, if you are going to remove the shower head, then what you need to do is to place several vinegars in a non – metal bowl. I repeat the bowl should be non – metal. After that, you have to place the shower head in that non – metal bowl and allow it to sit it for at two to three hours. This part is very important. So remember what I say.

• If you are going to clean your shower head while it’s still attached, then pour three inches (which is around 7.6 cm) of vinegar into a plastic bag. Then with the help of a rubber band, you have to carry it into the washroom. After that the thing you need to do is to pull that open plastic bag around the shower head. Now you need to move the nozzle in order to face it downward. At the same time, wrap the rubber band around the baggie and the top of your shower head. Finally, allow the nozzle to sit inside the distilled white vinegar for two to three hours.

After completing all these steps, now you need to remove the shower head from the vinegar. Now it’s time to pour the vinegar down the drain.

Manage a toothbrush and with the help of that particular toothbrush what you need to do is to brush smaller nozzle pieces dipped in vinegar. If you really have plenty of mineralization in your water, then will surely loosen the caked on minerals from inside of the head.

Perfectly rinse the distilled white vinegar through the shower head.

• If you have already removed the nozzle, then you have to perform two things. At first, you need to turn on your sink faucet and secondly you have to allow a strong stream of water to undergo the pipe attachment into the nozzle. You must need to allow it to run for thirty seconds.

• But if you didn’t remove the nozzle, then turn on the water at high pressure to clean out the vinegar as well as mineral deposits. Also allow it to run for thirty seconds.

So that’s all about the process of cleaning your portable water filters shower head. I think it’s quite easy if you follow the step properly. Make sure you have sufficient time to perform all the steps as cleaning a shower head is not a matter of an hour. You can use your leisure time for doing this. Finally a big thanks for reading this article.