How to extend the life of precision tube

Many people think precision light tube is not easy to rust, precision tube service life is long, in fact, it's just on the other hand, precision tube corrosion resistance is good, because the surface membrane, forming a layer of purification in nature, it exists in the form of more stable oxide.

Precision tube of along with the development of the economy have become more widely used, people in daily life is closely related to precision tube, but many people knows little of precision performance of the light pipe, the precision of the light pipe maintenance, you will know more minority. That is to say, precision tube, though different in accordance with the conditions of use, oxidation degree is different, but in the end are oxidation, this kind of phenomenon is often called corrosion.

All bare live corrosion environment of metal surface electrochemical reaction and chemical reaction, even from corrosion, precision purification of membrane tube surface corrosion resistance ability weak parts, because of the self-excited excitation reaction and form pitting, generate holes, plus aerobic ion close, form a very strong corrosive solution, the speed of the accelerated corrosion reaction. And precision tube inside the intercrystalline corrosion cracking, all of these, purification of membrane occurs on the surface of precision tube damage.

Therefore, the precision tube surface must be regular cleaning and maintenance, to keep its gorgeous surface and prolong its service life. Cleaning precision tube surface must pay attention to the surface scratch occur, avoid using bleach composition and abrasive detergents, steel wire ball. Grinding tools etc., to get rid of washing liquid, wash rinse again at the end of the surface.

Precision tube surface dust and easy to get rid of dirt are available soap detergent to wash, binder composition, use of alcohol or organic solvent scrubbing (ethyl ether, benzene).

Precision light oil on the surface of the tube, the oil lubricating oil pollution, with a soft cloth to wipe clean, use neutral detergent or ammonia solution or use the detergent for washing. Precision tube surface of bleach and various acid, immediately wash with water, then use ammonia solution or neutral fizzy soda solution immersion, use neutral detergent or warm water washing.

Rainbow lines,precision tube surface are caused excessive use of detergents or oil, when washing neutral detergent to wash with warm water. Precision tube surface contamination caused by rust, available 10% nitric acid or abrasive detergent washing, also can use special washing washing.