How to Fix Canon Printer Error Code 5100?

Nov 21
08:25

2018

Lily James

Lily James

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Canon Printer Pixma MX490 is the world’s popular brand that supports to give outputs of top-quality prints. It becomes quite frustrating for the users when they start deals with the issues like printhead overheating & etc. However, these given steps may be stopped your problems, but if the problem is still persisting, then you can reach up to Contactforhelp in order to get Canon printer customer service to get the help from the proficient expert. It is the user-friendly online directory.

mediaimage

Canon Printers are known as the remarkable device that produces top quality prints in the present century. This printer has a great reputation across the world. One of the leading brands “Canon Pixma MX490” has created the significant contribution to their users. But the negative impact is that sometimes the users of Canon Pixma MX490 occurs unexpected problems due to many reasons. But usually,How to Fix Canon Printer Error Code 5100? Articles it mainly happens due to the overheating of the print head. You must look that How to Solve the Error Codes in Canon Printer? Here, this blog provides you the methods of configuring the same issues.

How to Troubleshoot Canon Printer Error Code 5100? Method 1:
  • First, you need to turn off the printer and then open the print head.
  • Now, turn the printer back on which cartridges will start moving to the left. You must close down the printer cover and leave the printer turned on before cartridges reach the left side.
Method 2:
  • You can reset your Canon Pixma print head and then turn off your printer and left it for minutes as turned off.
  • Now, you need to turn your printer back on and then check whether the problem is solved or not.
Method 3:
  • Here, you should remove and clean your printer print head and also clean the connectors of the print head with alcohol and cue tips.
  • Kindly ensure that the connectors are completely dry before turning on of your Canon Pixma MX490 printer.
  • After that, for starting the reboot mode on your printer, you need to press the power button.
Method 4:
  • You must take out all of the ink cartridges and then lift up the grey bar by where the link has been going.
  • You need to leave your print head in the middle of the printer where the entire printer was off.
  • Now, clean the plastic head primers/cleaners by the end of your on the printer.
Method 5:
  • You have to replace the cartridge which is problematic and then try to check your printer manually when you wish to replace the cartridge.
Method 6:
  • To instantly solve down the issues of Canon Printer error 5100, you have to check for any obstructions and then power down your Canon Printer.
  • Now, remove the paper and then check for other obstructions.
Method 7:
  • You have to press both power and copy button on your Canon printer and then wait for a couple of minutes.
  • Once completed, your printer will start and then you need to perform a nozzle check.

 

It is possible that might these suggested methods are not adequate for you, so, you need to coordinate with the Canon printer customer service. You can avail the Canon official phone or toll-free numbers from Contactforhelp; the world’s recognized online directory.