How to Install AMPsentrix Core Battery on iPhones?

iPhone batteries are rated to hold 80% of their capacity for up to 500 charge cycles, which lasts roughly 18-24 months for most users. After that, your iPhone may need to be charged far more frequently, and iOS may warn you that performance is affected (in other words, your phone will run slower).

Ampsentrix core is a new lineup of Ampsentrix batteries that come without flex cables and boards. The product includes just the core of the battery hence the name Ampsentrix Core.

AMPsentrix Core allows you to replace iPhone batteries while keeping the important battery info intact!

AMPSentrix Core allows you to replace batteries for iPhones and above without limiting your customer's battery health data. Compared with other battery this AmpSentrix Core battery charge faster, last longer and have a higher power density for more battery life in a lighter package. Our AmpSentrix Core batteries not only pass industry standards but we are also certified by official standards. All AmpSentrix Core Batteries come with Zero – Cycle count, OEM TI Gas Gauge Chip, and Pre-installed Battery Adhesive.

Now a day, there are many DIY replacement Steps have been check to replace iPhone Batteries.

Are you new to the Cell phone repair industry? and you are looking for iPhone Battery Replacement Steps and video? here we will guide you How to replace iPhone Batteries. Just follow the below steps.

1. Remove Sim Tray and Remove two 6.75 mm long Pentalobe P2 screws at the bottom edge of the iPhone.
2. Heat the lower edge of the iPhone using hairdryer or heat gun.
3. Using iSclack tool, you can separate LCD Display from body.
4. Remove Original Flex from the Original Battery.
5. Spot weld original Flex to new AMPsentrix core.
6. Fold the Flex and Install the Supplied flex Cover.
7. Apply Flex Cover Sticker.
8. Plug in the tag-on flex to the battery connector.
9. Plug in the tag-on flex to the battery health corrector.
10. Plug in the Battery health corrector to a PC and run Qianli Repair Helper Software.
11. Reset the Battery health Percentage and cycle counts.
12. Unplug the battery from the battery health corrector and install it in the Device.

Using these DIY steps, you can replace your damaged iPhone Battery with AMPsentrix Core Battery. These steps also help you every retail shop owner to replace AMPsentrix core Battery.

Here are Some important Tools during installation.

1. Macaron Portable Spot-Welding Machine
2. Battery Spot Welding Fixture
3. Qianli TAG-ON flex
4. Copy Power Battery Health Data Corrector

Why Do I need a Tag-on Flex?

The Tag-on Flex is needed for the iPhone 11 series and 12 Series and not for the XR, XS and XS Max. It is used when resetting the battery data and stays on the battery when installing the battery back in the Device.