How To Setup Canon PIXMA Pro-100s Wireless Connection?

Aug 9
08:53

2016

David Sem

David Sem

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Canon PIXMA Pro-100s, an outstanding printer with high printing efficiency. Get the expert’s overview to establish a wireless connection for printing from anywhere using the connected device. Canon Support officials promise to address your request for assistance.

mediaimage

Some access points feature and auto-connection option labelled "WPS" that stands for Wi-Fi protected setup. It allows the permitted devices such as the PIXMA Pro-100s to connect with the network using a secured password and enable the quick methods to connect devices.To follow the method,How To Setup Canon PIXMA Pro-100s Wireless Connection? Articles you need WPS Connection Method. Interested users can find assistance for WPS options at the official Canon printer support website. All the effective solutions to resolve critical printer problems have been listed at the site. See here how to get started with PIXMA Pro-100s.

Steps to setup Canon PIXMA Pro-100S Wireless Connection Setup

Step 1: Check the access point for a physical WPS button. See the user manual to check how to locate WPS option.

Step 2: The WPA and WPA2 security protocolmust be enabled, so the access points use the protocol.

Step 3: Press and hold WiFi button until the white power lamp flashes and later releases it.

Step 4: Now, the WiFi button will flash blue, move to the access point and press the WPS button for approx 2 minutes.

Once the WiFi appears in blue light, the flashing light will appear to connect with the access point.As the setup will start, the white light will alternatively start flashing. Next, both the lights will stop flashing and remain lit.

Steps to configure network settings on Canon Wireless Printer

To confirm the printer is successfully connected to the wireless network, then print the network settings of the printer. Now follow the instructions mentioned below:

Step 1: Ensure the printer is turned-on.

Step 2: Load A4 sheet or letter sized plain paper.

Step 3: Finally, press and hold the Resume/Cancel option until the white power lamp flashes approx 6 times and releases it. It will now print the network info page.To avoid problems, check important details on the printout, the Connection means Active and the Service Set Identifier - SSID refers to the wireless correct name. It helps you to conclude the WPS setup procedure, so now you can proceed to install the software to make the most out of the PIXMA Pro-100s.

Lastly, if you are unable to complete the connection process, just remain confident and dial the Canon customer support number. The 24x7 helpline assists every proud owner of the PIXM-Pro 100s. For alternative helpline number, visit Contactforhelp web-directory.