The keychain pocket watch parts

Dec 25
13:21

2011

ShoreAnthony

ShoreAnthony

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Basic and in a general way, the keychain pocket watch mechanism consists of motor, running, exhaust and regulatory body.

mediaimage

Each keychain pocket watch has a complex system. The mechanism requires a regulatory body. Within the clock mechanism itself,The keychain pocket watch parts Articles the first thing we find is the motor. It consists of the mainspring and the ratchet, which contains it, and serves primarily to provide power to the clock. The ratchet, left, contains the mainspring. As you can see, the mainspring is a sheet of steel or alloy, rolled once and within the ratchet is very tight.

So, we have a real spring rolled into a circular piece, the ratchet or socket, but where does energy comes from? Well, the ratchet, in addition to being rolled up has two tabs that attach to the inside of the ratchet and the lateral side. The ratchet, meanwhile, has teeth on the outside, so that will be manipulated by increasing the winding mainspring, generating a fundamental tension so that the clock begins to walk. We call or arm winding the mainspring.

The mainspring disarmed

This energy comes from outside and may well be generated by hand, by moving the crown, which would be a keychain pocket watch line, or automatically, thanks to an auxiliary part, the rotor, which rotates with our movement of the wrist and provides the clock energy.

The shooting, or running gear, is made with pine nuts wheels, which are essential to mesh with each other and distribute the movement of the wheels. The mainspring is attached to the undercarriage to get to escape. The watch has three wheels: the minute hand wheel, the largest, the front wheel, and the second wheel or seconds.

Fully coupled, power train transmits power to the exhaust system, composed of the escape wheel and anchor. The keychain pocket watch escape function is to control the amount of energy, and thanks to its special composition will pass power to the wheels in small touches, with the famous tic-tac we all know.

The escape wheel is a somewhat special, which gets its energy due to small movements looper, equipped with two pallets of rubies: every movement of the anchor, the escape wheel moves a tooth, thus transferring energy wing first round that is, curiously, the second wheel.

The regulatory body

Last but not least, there is the regulatory body, formed by the steering wheel and the spiral. The steering wheel is a piece which, as its name suggests, is shaped like a wheel. It has several arms and usually takes several screws that allow proper keychain pocket watch adjustment.