Tips to Maintain Efficiency of Back-Hoe Loaders

Oct 19
09:39

2015

Samil

Samil

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Due to its relatively small size and versatility, backhoe loaders are very common in urban engineering and small construction projects such as building a small house, fixing urban roads, etc. The nature of work for which backhoe is used is bound to cause a lot of wear and tear and regular maintenance of this machine is essential to ensure cost-effective operations, higher efficiency and longer life.

mediaimage

Few tips on how to maintain efficiency of backhoe loader:

Inspect the machine before using

Before you start operating your Backhoe Loader,Tips to Maintain Efficiency of Back-Hoe Loaders Articles take a walk around the machine and check if everything is fine with the loader or not. You can also find a daily checklist in the manufacturers’ kit or on the machine which will guide you to perform necessary tasks for checking the condition. At the front of the machine, check the cutting edge, if it is eroding and the bucket is getting impacted. On the back, check for broom and stick for any signs of damage. Check under the machine for any signs of leaks. Apart from this, check the engine compartment to make sure that air filter is working fine. Check the coolant and windshield water container levels too.

Greasing

Being a complex machine, with many moving parts it is important to check if all the parts of the machine are properly greased or not. The maintenance person must have the knowledge about all the locations on the machine that need regular greasing. Using the grease of quality and specification that has been recommended by the manufacturer is important. The grease may differ for the region in which the machine is being used, based on the temperature of the region. High quality grease may cost a bit extra, but the benefits that it delivers in terms of elongating the life of major wear areas, makes it worth the cost.

Over greasing is not good as well, as it may attract dust or dirt particles to stick with the grease, which in turn may result in to wear and tear. 

Tire Maintenance

Never neglect your tire maintenance schedule. Regularly check to see if tires are flat or not and ensure that there are no cuts on the tires. Proper tire pressure is necessary to have a longer life for tires, low tire pressure can adversely impact the ride quality as well and the machine will be unstable and will be difficult to operate.

Clean Oil

As backhoe operates in dusty conditions, it is important to ensure that the oil in the system remains clean. Clean oil is essential for extended transmission and engine life, and for proper heath of hydraulic systems. Contaminated hydraulic system could adversely impact the hydraulic components. Extra care should be implied while checking oils, no two oils must be mixed. If unclean oil is used, you are exposing critical parts of your machine to risk and it could lead to high repair cost.

If you are looking forward to buy pre owned construction equipment, Shriram Automall India Limited would be the best choice for you which has its presence all over India. Second Hand construction equipment, commercial vehicles, two-wheelers, three-wheelers, Cars & SUVs are available at SAMIL with many other facilities like Insurance, Finance etc. Acquisition and disposal of used construction equipment is very easy, you can use SAMIL’s physical and online platforms for the same.