Do We Need Special Valves In Specific Industries?

The list of valves and their specific purpose can be long. As a matter of fact, every valve has its specific purpose for which it was meant for during its design and manufacture. Here, we are going to discuss the valves for power plants and the full bore pipeline.

Do we need valves for power plants?

Power plants are basically industries that produce power from various types of resources such as wind, water and geothermal sources. These firms, like any other firm, do need valves for them to run efficiently. There are special types of valves that are designed specifically to cater for the needs of the power plants.

Power plant valves are used in the mostly in cooling systems of the power plants. Here they control the flow of liquids basically water through the inlet and outlet so that if the system is overheating then there is constant flow of cold water that actually tries to cool the system. When there is no overheating, the valves tend to regulate the flow of water by allowing less if any. These valves play a very important role in the cooling system of the whole plant, failure of which, there can be more problems in the industry.

We can narrow down to the various types of valves used in power plants and appreciate their significance. First, we have the butterfly valves which protects the water supply of the pumping station and the downstream pipelines. Butterfly valves together with the brake and lift unit are perfect in protecting the main cooling water pumps.

Apart from the butterfly valves, power plants also have the plunger valves which allow for the precise control of the flow rate discharging the pressure of the water. More so, these valve ensure water reaches the required destination basing on the urgency of the matter. For instance, if water is needed by the fire fighters or fire brigade, then the valve allows more water with a lot of pressure to flow in that direction in order to allow them deal with the fire outbreak as fast as possible.

Benefits of Full Bore Pipeline Ball Valve

There are special types of valves for regulating the flow of gases in a system. The Full Bore Pipeline Ball Valve is one of the valves that facilitate flow of gases through pipes following the restrictions that they have been made to have. More so, they provide a solution for throttling and severe service applications in gas distribution and liquid transmissions. There are two types of this valve, one is the fisher 250 with reduces bore ball while the fisher V260 has the full bore ball which is compatible with the CL300 for high capacity process application.