Some of the best professional carpet cleaning methods

A small step in the direction of improving the appearance and health of your home is to incline towards the needs of your carpet cleaning and up keeping routine.

There are several types of cleaning processes dominated by advanced equipment. They’re the ones recognized more frequently by leading carpet manufacturers and carpet cleaning specialist firms.

Low-moisture extraction process- This method is also referred as steam cleaning at times. But that does not make them the same process every time cause of any differences. In this method a cleaning solution is mixed with hot water and used as a fine spray. This release dirt due to the heat and solution spray, which is then pulled out by powerful vacuums. The next step is drying, which may take around a few hours to about twelve hours depending on the carpet fiber and the kind of cleaning equipment used.

Steam extraction method- If the carpets are severely soiled or are subject to the vagaries of kids and pets at home, the most preferred method is the steam extraction method. In this method special high pressure steam emitting machines for cleaning, injects a fine vapor or smog of hot water mixed with the cleaning solution deep into the mass of the carpet. The carpets, then starts releasing dirt and grime from the fibers, and on the other hand a strong vacuum immediately extracts all the dirt and moisture. This type of cleaning also removes foul smell or odor and even kills bacteria and dust mites.

Foam extraction technique- Commonly known as carpet shampooing, foam extraction is a popular process for carpet cleaning. Here a foam-based cleaning agent is applied on the carpets and rubbed into the pile with a motor powered brush. This leads in releasing of soil from the carpet fibers. Then, once the carpet and foam are fully dry, the residue and dirt are vacuumed away from the carpets.

Dry compound extraction process- In this process dry compounds are sprinkled onto the carpet and the dirt is dislodged by working the compound into the fibers with a manual or motorized brush. It is also called dry cleaning at times. In addition, sometimes the carpet surface is lightly misted with a corresponding cleaning solution to help release grime easily. This process is followed by removing the dirt that has been absorbed by the compound with a powerful vacuum. The compounds and dry formulas can be organic, can be some others blend of natural and man-made compounds and even sometimes polymeric.

Bonnet cleaning procedure- Bonnet cleaning is actually a wet process. In this method a cleaning solution is mixed with carbonated water and applied in the form of mist after which a rotating bumper or bonnet machine is brought into act to spread the cleaner. Following this an absorbent pad is used to extract the soil and dirt. The dirty absorbent pad is repeatedly replaced with a clean one, until there is no more dirt seen on the pad.

These techniques of carpet and upholstery cleaning are taken up by many industry professionals. So to achieve a proper, deep-down cleaning, select company that uses some of the top cleaning techniques.