Strategies for Mold and Mildew Removal

You may need to undertake a mold and mildew removal task if you have observed that your children have been sneezing and catching a cold too often. In addition to this, you may also have noticed a slight musty odor and some dark stains in the kitchen, bathroom, sidings, roof and basement. If left unchecked, these fungi may cause severe health problems, structural problems for the home, and a reduction in its market value. Therefore, mold and mildew removal should be done as soon as possible to avoid graver problems in the future. Mold and mildew removal can be done by using mold removal products that usually kill these fungi so that they can be wiped off from the surfaces. You may also use products that are commonly found in the home like bleach, vinegar, baking soda and hydrogen peroxide. Just make sure that you are wearing a safety mask, gloves and safety goggles when you are doing this. You will need to spray or apply the solution to those surfaces where there are stains. You will likely find them in the bathroom, kitchen, shower room, basement and even in the attic. You may also want to make a thorough investigation of the whole house and be on the lookout for wet places. If there are such places, molds and mildew are likely to grow there fast especially if these locations are hardly reached by sunlight. You may need to careful when you find areas where the mold and mildew have dried up because they may still contain spores that could get inside your respiratory system. After spraying and applying the solutions for getting rid of mold, you can also check the external parts of the home because mold and mildew may also be found on sidings. Aside from spraying the mold removal products, you may also need to perform powerwashing for stubborn stains. You may also have to check the roof or call in a contractor to assess it for cracks that could be letting moisture in. A plumber could also be needed to ensure that any leaks in the plumbing are eliminated. It may also be advisable to ensure that your air conditioning system is performing its task for keeping the amount of moisture in the air at a low but comfortable level by measuring humidity using a hygrometer. This should fall within the range of 30 to 50 percent. If the value is higher, you may need to get the services of an air conditioning specialist to remedy the problem. For mold and mildew that is found in drywalls, simply applying the cleaners may not suffice for mold and mildew removal. Only the external surface could be reached by the solutions. Thus, you may have to replace them using mold resistant drywall. As for carpets, you may need to throw them away if the application of vinegar or hydrogen peroxide fails to totally remove the fungi. You also have to be careful when applying chemicals like hydrogen peroxide because these may damage the fabric.