Two Way Carpet Cleaning Approach Best for Adhering Adhesives and Fiber Protection As Well

Sep 2
10:52

2015

Ma. Theresa Galan

Ma. Theresa Galan

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

It is important to note what the adhesive is made of, so that you will know whether an oil or water-based solvent will work best. Using household cleaners or store bought removers, you can remove adhesives from carpet pile fairly quickly. This article will tell you how to get adhesive out of carpet.

mediaimage

Removing adhesives from carpeting can be a time consuming job as it must be worked out of the carpet fibers. There are plenty of products available to aid in the process,Two Way Carpet Cleaning Approach Best for Adhering Adhesives and Fiber Protection As Well Articles but the larger the area that's affected, the longer it's going to take. There are no shortcuts with this clean-up job, but the results will be well worth the effort.

One of the trickier problems arises when you remove adhesive tape from your carpeting. Namely, that you often find some residue left behind. Luckily, removing adhesive tape residue from carpet doesn't have to be all that impossible or even difficult a task.

If you do craft projects around or on carpeting, your carpet may become stained with glue, superglue, tape or another kind of adhesive. On how to remove this, you must consider the care for fibers first

Removal Steps:

  1. Begin by choosing the desired carpet cleaning product. If the first one doesn't work, feel free to try a second. You may find that one works better for the particular type of tape residue found on your particular type of carpet, so feel free to experiment.
  2. It is best to work in small lengths along the strip of residue.
  3. Apply a small amount of cleaner to a section of the residue. Try to keep your section less than 12 inches.
  4. Wearing rubber gloves, gently rub the fibers of the carpet to work in the cleaner and loosen the residue.
  5. Gently rub the fibers with the soft cloth to remove the residue. Continue working with clean areas of the cloth until all of the residue is gone.
  6. Move onto the next section and repeat the process above.
  7. When the entire area of residue is removed, the next step is to remove the cleaning product.
  8. Wash the area with a mild soap and water mixture. Moisten a soft cloth and gently wipe the area until all of the cleaner is gone.
  9. Allow the area to dry completely.
  10. When the entire area is dry, vacuum to restore the fibers to their normal texture.

When using products designed to break down adhesives, ensure that you only moisten the tops of the fibers. If the product soaks into the carpet backing, it will dissolve the glue that holds the carpet together and cause a much bigger problem. 

If your best is not enough though, always refer to pros assistance

Check out Auckland Carpet Cleaning for reliable help needed