If the flooding in your home was bad then chances are, your carpet was completely soaked in water. You may have to remove the water from your home first before you can even remove the carpet off the floor. Mold can begin growing within 48 hours of a flood inside of a wet home, posing dangerous health risks to the occupants.
Carpeting is an area of the home that can be at high risk for mold growth. In order to grow, mold needs moisture, oxygen, a food source, and a surface to grow on. Mold spores are commonly found naturally in the air. If spores land on a wet or damp spot indoors that contains dust for them to feed on, mold growth will soon follow. Wall-to-wall carpeting, as well as area rugs, can provide an ample breeding ground for mold if conditions are right. At especially high risk for mold growth are carpeting located below ground level in basements, carpet in commonly moist or damp climates, and carpet that has been wet for any period of time.
In many cases, if mold has grown on carpet, cleaning will not be possible. If growth has occurred on more than one area of the carpet, or if there is a large area of growth, the carpet will probably need to be replaced.
Small areas of growth that have been quickly identified can sometimes be dealt with. Detergent and water used with a steam-cleaning machine may be enough to clean the carpet thoroughly. It is then important to ensure that the carpet dries completely after cleaning to prevent the growth from recurring. Stronger cleaning agents can be substituted if detergent does not work. Anything stronger than detergent or common rug-cleaning products should first be tested on an inconspicuous area of the carpet to ensure that the rug will not be damaged during cleaning. About 24 hours is a reasonable amount of time to wait after testing to be sure that wider cleaning will not discolor or damage the carpet. Another option in instances where mold growth is not widespread is to remove the ruined section of the carpet. If cleaning has been attempted unsuccessfully, the area of mold growth may be removed and replaced with a patch of similar carpet. Of course, this will only work in situations where aesthetics are not a big concern, since exactly matching the patch to the original carpet may be difficult and the seam may be visible. If mold has grown in more than one area of the carpet, or if the area of growth is larger than a couple of feet, this will probably not be an effective method of mold removal. As with all areas of the interior at risk for mold growth, prevention is the best method of control for carpet mold. Eliminating high-moisture conditions and preventing the risk of flooding or standing water will reduce the possibility of growth. Inspectors will want to know where to look for and how to identify mold growth in carpeting. It is also helpful to know how to determine if carpet should be replaced, or whether there is a possibility of cleaning and saving it. For more information, check out the links below: water damage auckland, carpet drying auckland, flood restoration
Getting Out of Trouble with Carpet Dirt Build Up
Dirt is not a difficult problem but if you let it build up for a while or worst for a much longer time, no one can tell if you can still remove it unless you call the experts to do it for you. Carpet dirt is the same story thus it is good to do away with it or else you need not do it yourself.
How to Get Easy on Pest Inside the House
First important thing to consider if you want pest to be out and not inside your house is to avoid attracting it. The more you make their favorites available inside your house, the more you get into trouble.
Working on Carpet Cleaning and How to Make It Better
Give your carpet's dirtiest spots and spills attention first. Here's the thing about carpeting: the plush, dense fibers we love to feel underfoot are also really great at clinging to dust, dirt, smoke, pet odor, and whatever other grime comes through the door.
