When is Wet Carpet Cleaning Unsafe

If the carpet is truly drenched, you can start by pulling up the carpet. This will allow you to dry the carpet pad and base of the floor and check for mold. Also, with the carpet not attached to the floor, you can dry the carpet from both sides. If you can hang the wet part of the carpet, you can leave fans to blow it dry. Once the carpet is dry and the base of the floor, too, you just have to staple the carpet back down.To get carpet really dry, you need to get to the source of the problem first. Before you begin any method of drying the carpet, make sure there will be no other liquids drenching your dry plansIf using vaccuum, it's a good idea to first rinse the dome filter of the machine even if it doesn't look blocked to maximise the machine's vacuum airflow. Then, after vacuuming with the machine, allow the carpet to dry thoroughly. If weather permits open windows and doors to increase air circulation or use fans, heat or air conditioning to speed the drying process.Removing stains and odors that wick-up from the base of the carpet: Regardless of whether you're cleaning Berber or pile carpet, occasionally if over-wetting occurs or, for instance, there has been a pet accident that you may have been unaware of or spills you once thought had gone - these can reappear due to wick-up. The best way to dry wet carpet, is to use a wet vac or carpet shampooer to suck up the wetness out of the carpet. If it is too wet and left too long, it will get moldy and smell very awful. While the carpet may dry out, you may not like the look or smell of it afterward. If worse comes to worse, the great thing about carpet is that it can be replaced. If it is really soaked, you should use a carpet cleaning machine to suck as much of the liquid out as you can. You could also step on the area with towels and get as much liquid outBe guided by professional Auckland Carpet Cleaningfor best assistance needed