How to Open an Inground Swimming Pool

Apr 16
15:34

2020

Nancy Whitman

Nancy Whitman

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Winter is over. And, it is time to open up your inground swimming pool again. Time to have fun in the sun again.

mediaimage

Winter is over. And,How to Open an Inground Swimming Pool Articles it is time to open up your inground swimming pool again. Time to have fun in the sun again.

However, there are a couple of things that you need to do for you to open up and clean your swimming pool correctly. The only way that you can have fun soon after you have opened up your pool, is to do it correctly in the first place. These are things that you need to make sure about, to get your pool summer-ready easily and without any problems.

The right swimming pool cover is the first thing you always need to purchase

Professional pool Builders - The first thing that you need to do, is to get the right swimming pool cover in the first place. There are some of the cheap versions, and there are high-quality pool covers that won’t leave your pool filthy and green after the summer. This is the type of pool cover that you should consider. 

These covers might be a bit more expensive, but if you start off correctly by ending the summer with adding a top-quality cover and a good pool cleaning, then opening your pool will not give you a nasty surprise. 

Opening up the swimming pool starts with carefully removing the pool cover

The first thing that you need to do when summer starts, is to open the pool by removing the pool cover. If there is lots of debris on the cover, you need to remove it without damaging the pool cover. Normally a pool brush will be enough to get rid of most debris on the cover.

Remember that when you are removing the cover, it might slip into the water, leaving all the debris from the cover in the water. Something that you really don’t want. This is why it is recommended that you are cleaning the cover before you remove it. 

Rinse and backwash the swimming pool pump as well  

The next step is to rinse and backwash the swimming pool pump. There will always be some water left from the previous pool cleaning. Meaning that this is now old, green water. Water that you don’t want to get into your pool. This is why backwashing the pump is so essential.

Rinsing the pump with clean water is necessary. Making sure that the water is clean before you switch it to your pool. By cleaning your pool, but sending filthy water through, isn’t going to work at all. 

Using a high-quality, algae cleaner if your pool has algae

For some, this step might be necessary, while for other this can be skipped. If you have a green pool, or if the water of the pool is green, you will need to clean the pool with an algae cleaner. You just follow the instructions on the bottle and make sure that your pool is getting crystal clear again.

After this treatment, you are using the normal pool cleaning products to clean your pool as normal. The first application of the cleaner might be more than normal. This will give your pool clear water that you need to have some fun again in the pool.

Opening the inbound pool after winter isn’t as complicated as what you might think. Many people struggle for months or weeks to get their pool clean again. But with this guide, you will know that the pool is going to be clean and safe to swim in, in no time. Enjoying the summer with your family and friends again. Just remember that if you want to have fewer problems when opening the pool, is to get the best and high-quality pool cover before winter starts.