A Guide For Assembling The Bugaboo Cameleon Stroller

Items:Box 12 Large Wheels2 minor wheelsFrame handleSeat frameChassisFabric for basketFabric for seatFabric for bassinetBassinet mattressBox Number 2CanopyApron for the bassinetCover for the seatManufacture the frame by attaching the wheels to the chassis. Make sure that the big wheels go at the back and the minor wheels at the front. As the wheels slide into position, there is an audible click to let you know they are secured.whenever the tiny wheels are attached you will see a knob appear at the other side of the opening where they slide in.fix the basket. The logo should be facing towards the back of the stroller. The velcro side straps are situated at the front and these should be connected to the frame. There are four fastening points. 2 in the front and 2 that secure to the heart cross bar.Setting up the bassinet:Ensure that you can discern the difference between the head end and the foot end of the frame. The head side has smooth rubber on the frame and the foot side has rough rubber on the frame. Situated at the foot end you will observe a silver pin on the outside of the frame.To find the head side and foot side on the bassinet textile, take note of where the zipper is situated. This is the foot side and where the apron will link. There ought to be plastic stiffeners in the head and foot of the bassinet and there is an opening for them to slip inside. These may hold fallen out and might be loose in the box that the stroller arrived in.Use the velcro straps to fix the bassinet material to the frame ensuring that the head of the fabric is connected to the head of the frame. Do not forget to attach the two velcro straps at the bottom of the frame where the frame will secure to the chassis.The bassinet can straightaway be attached to the chassis.Place the mattress on the bottom of the bassinet.Use the zipper to fasten the apron.Fasten the carrying handle across the centre of the bassinet.Attach the canopy making sure that the bugaboo logo is at the outside. The canopy clicks into attachment points on every side at the centre.Seat set-up instructions:Ascertain that all bassinet material is removed. This can be done while the frame is still connected to the chassis.Get hold of the head of the seat textile.Glide the pocket opening over the smooth end of the frame and secure the two velcro straps at the bottom (foot) end.The side straps are harder to secure and you might need help. The side straps join to the silver pins on the frame. If required, put the frame on its side and press down on the frame to bend it a little to permit the hole on the strap to line up with the silver pin.Lift up the existing seat cushioning and fix the extra cushioning by sliding it over the seat as you did previously. Feed each of the safety straps through the holes in the added cushioning. Fold the current seat base back into position again. join the seat carry handle in the same method that it was attached to the bassinet.You have immediately built your Bugaboo Cameleon Stroller. Further Information may be found at Uppababy Vista Stroller and Bugaboo Cameleon Reviews.