A Step By Step Mudjacking Process

Mar 11
15:08

2016

Paramjeet Singh

Paramjeet Singh

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

In this article you can get infomation about Mudjacking. Mudjacking is a process that comprises three major steps.

mediaimage

Buying an own house was a long time dream of mine. When it turned true my happiness knew no bounds. I was in the seventh heaven for this achievement in life. I gave my best efforts to decorate my home the way I always wanted to. From candles to chandlers and from rugs to bed sheets,A Step By Step Mudjacking Process Articles all the things were handpicked.

 Slowly and gradually time passed by and my house became old. The plaster begins to peel off and there were cracks and open cervices. The biggest issue of my home was sunken surfaces. It was easier to repair the cracks and the plaster, but the cost of replacing the sunken surfaces was too high to bear. It made me think hard to find an alternate for replacement. If this is your story too, than we are sure you need our advice in it.

 The best alternate for sunken surface replacement is mudjacking. A few of you must be aware of what mudjacking is. But for those who are still wondering what does mudjacking means. Here is a quick introduction of this state of art technique of elevating the sunken surfaces.

 Mudjacking is a process that comprises three major steps.

 Initial step: The first step of the mud jacking process is drilling holes in the sunken surface. These holes are dug in symmetrical distances. These holes help in opening the linking channel between the sunken surface and the ground below.

 Superior quality drilling machines are used for the same which helps in making this process less time consuming.

 Intermediate step:  In this step a mixture is prepared to fill up the dug holes. This mixture is called slurry. This process has an ancient history; it was used in early Greek and Egyptian times. Now days the mixture is made up of best concrete solutions. The most recent development in the mixture formation is polyurethane mixture. This mixture provides the best leveling solution.

 This slurry is filled in hollow between the sunken surface and the ground. This slurry settles in very fast and strengthens the bases of the sunken surface, ultimately leveling the sunken surface.

 Final step: Once the holes are pressure filled with the slurry the final step is sealing the dug holes with quick drying cement. Once the holes are sealed you get a ready to use surface within a few hours.

 Mudjacking has become very famous lately as it gives instant and permanent results. There are lots of benefits of mudjacking; a few of them are listed below:

 

  • It is a quick process which gives you results instantly.
  • The cost of mudjacking is fractional compared to the cost of replacement.
  • Eco Friendly, as it does not leave any debris to clean as no replacement takes place.
  • It is not a noisy task, so you never disturb your neighbors.
  • It can be practically done in any weather.
  • Ready to use surfaces in a very short time.
  • No difference in the surfaces as nothing comes in new.

 Mudjacking is a great mechanism of elevating the sunken surfaces. If you have any sunken surfaces at your home, get mudjacking done right now.