Basic Methods of DIY Wall Claddings and Benefits

Jun 16
08:49

2015

Jag Cruse

Jag Cruse

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Do it yourself project for wall cladding is easy, but requires fundamental knowledge about tiles, panels, blocks and cutting. There are also different kinds of panelsthat can be used in wall claddings. Stone wall cladding looks classical but it requires lots of expertise, also metal wall cladding gives a contemporary look and easy to mount on the wall.

mediaimage

Wall claddings have both functional and aesthetic values; become a trendy decorative feature in residential and commercial establishments. Stones claddings are good looking and robust but for DIY alternatives,Basic Methods of DIY Wall Claddings and Benefits Articles ready-made wall claddings create a good option. For DIY wall cladding project, it is not so difficult as it seems; only thing is you should know the basic details of cladding and details of your establishment.

DIY methods of wall cladding at your home

There are various options of wall claddings, for example classical wall claddings are of stones, quite difficult for home DIY projects. In the market there are ready-made slabs available that can be easily maneuvered and cladded in the exterior and interior of your home. You can follow some basic methods of wall cladding in Melbourne that are as follows:

  • The first thing is to evaluate your area of cladding. You should have a clear calculation about the measured area. Buy some good quality raw materials to cover that area.
  • Metal claddings are easy to install, but if you want to cover it with stone or tiles, you need to first clean the measured area so that it will be properly installed.
  • Clear the wall properly and chip the rough edges before your installation. This will create a strong adhesion between the wall and cladding material.
  • Many people don’t use good quality adhesive. It is a mistake, which costs you in the long run. Always invest in good quality adhesive and generously smear on each block.
  • To make the thing more attractive, create an alternative pattern of tiles or stacked stone in Melbourne put it with a little gap in between. You can find different types of tiles, which you can mount it on the wall to create an artistic impression.

What to do and not to do in DIY wall cladding

  • In wall cladding, adhesion is the most important factor. You need to create a constant pressure for at least 24 hours to the blocks. It is convenient to separate your sides and then divide the work in days. So, you can work-out on your wall once at a time.
  • Do not start cladding from the upward. It is always recommended to starting cladding from downward and gradually going upward. Divide the wall into rows, so first complete one row and then go to next.
  • The cutting method entirely depends on the cladding material. You can find good quality cutting tools like wet saw, etc. from a good landscape supplies in Melbourne.
  • Do use an angle grinder to cut stone panel. For big tiles, and precise cut, you need a wet saw.
  • Do not cut the tiles/blocks inside the house.

Is metal panel a good alternative?

Metal panel is easy to install and can be easily fitted to any place. It is immensely versatile and can be installed for any cladding such as brick, pre-cast concrete, synthetic stucco etc. Metal panels are inexpensive than stones, easy to carry, cut and can be quickly installed. It costs minimum energy consumption and wastage. There are many varieties available in the market such as galvanized steel, aluminum or metals like zinc and copper.