Garage Door Repair for Residential Use

Many homeowners do their own garage door repair before asking for a specialist to have a look-see. This is a wise move since some problems with these car port entrances can be easily remedied. The following are tips and recommendations for possible ways of fixing the troubled unit.

Checking the Mechanism

One common problem that happens to these units is the panel not going up or down. The first thing to do is to check if the motor that operates the opener is functioning. One can tell if the motor is no electrical current is reaching the opener because there is usually a slight humming sound or a buzzing sound when the open button is pressed. If there is no sound, check the electrical socket if this is plugged properly into the wall outlet or power source. If it is, trace the wires that lead from the power source to the opener to see if there are openings or problems with it. Do not attempt to hold any opened wire as this can cause electrocution.

Another tip for garage door repair is check the track or the torsion springs if there are any obstructions lodged in the, which may be the cause of the malfunction. The tracks may malfunction of there is a sizeable obstruction in them. The spring may malfunction if it is worn out or too slack to create tension. The brackets on each wall that holds the metal tracks on which the entryways ride on could be loose as well. Try to see if any bolts are loose and if they are easy to reach and tighten, do so with caution.

For roll up doors and up and over panels, dents and splinters on the aluminum, steel or wooden panels can prevent it from rolling up or down properly. Do not try to force any kind of entrance panel down or up since this can come loose and injure someone who is nearby. It is also advisable to unplug the opener unit from the electrical source before actually handling it.

Some maintenance work can also be the key to garage door repair. Lubricating and cleaning the device and the mechanism helps to keep everything in good working order. Some doors need specific kinds of cleaners to remove the grease and dust while others can function with regular grease and the application of concentrated household cleansers. Maintenance is dependent on how dusty and warm the area is although it is best to clean and lubricate twice a year to be sure.