Non Slip Maintenance Of Honed Interior Marble

As a rule, honed finishes are more susceptible to soiling than polished finishes, because a honed surface is slightly more porous and absorptive than polished finish. However, the honed finish is easier to restore because it will sustain harsher cleaning efforts.

Normal maintenance of honed finishes involves as-needed washing with clean water and mildly abrasive cleaners, which retain a pumice-type finish, while the cleaners remove soils. There are thick liquid cleaners and chlorine-bleach type scouring powders commercially available.

The marble should be wet with clean, hot water. Then using a mildly abrasive alkaline cleaner and stiff bristle brush, wash in overlapping, swirling strokes. Suds can be left to stand for several minutes to permit the bleaching agents to work on the stains and dirts. Rinse thoroughly and dry with cotton, cotton flannel, burlap or chamois skin. Wipe well to avoid streaking.

If further cleaning is required, use a special treatment or make a paste to the consistency of syrup using a mildly abrasive alkaline cleaning powder if necessary. Rinse thoroughly and dry.

The products for the maintenance of Honed Marble and all other stone is available from http://www.marblemasteruk.com/shop

You may publish this article in your ezine, newsletter on your web site as long as the byline is included and the article is included in it's entirety. I also ask that you activate any html links found in the article and in the byline. Please send a courtesy link or email where you publish to: admin@marblemasteruk.com