Ways to fix Hp Printer not Printing Color Issues

Nov 21
08:25

2018

Rekka Katti Parakuthu

Rekka Katti Parakuthu

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

While working with HP printer, the users may often face problems with the printing color of HP Printer. The printer stops printing the desired color or prints uneven color.

mediaimage

There may be a number of reasons due to which this type of problem arises.

Some of the reasons for HP Printer not printing color are enlisted below:

  • If the alignment of the printer is not proper.
  • If the ink cartridges are empty or low on ink
  • If the device is not functioning properly or you are using obsolete device.
  • If the printhead is not properly cleaned.
  • If the clogs get blocked

How to resolve if HP Printer is not printing proper color:

You can resolve the printer related issues like it is not printing color by focusing on the enlisted points:

  • Check your ink cartridge properly: you should check the ink cartridge properly whether it has low ink or empty. If it does not have proper ink then you need to replace it immediately. Be careful about the snapping in the proper slot while you are replacing your ink cartridge.

  • Check the alignment of printhead: While using the HP Printer,Ways to fix Hp Printer not Printing Color Issues Articles it is required to place the alignment page on with the printed side down. Due to misalignment of the printhead, sometimes the printer does not print proper ink.

  • Align the printer properly: It is necessary for a printer to be in proper alignment to print suitable color. If it is not properly aligned then it may create color issues.

 

  • You should keep cleaning the printhead using an automated tool regularly: Sometimes, the printhead gets clogged due to which it causes printing issues and does not print proper color. So it is very important to clean the printhead using the automated tools.

 

  • Also go with Advanced Fixes: If you are unable to work with your printer after updating  your PC or Mac’s operating system then in this situation you should try uninstalling and reinstalling your printer driver

If you are facing problem like the HP printer not printing color correctly then in this situation you should opt the basic troubleshooting steps and before printing you should check whether the printhead is properly aligned or not.

You can also contact the HP customer service if the problem is persisting for a long time or can take assistance over the phone by dialing the customer helpline number.