Skidded turns and beyond

Mar 22
09:45

2005

Jakob Jelling

Jakob Jelling

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

For many beginners, learning to turn on a snowboard can be rather challenging and unnerving.

mediaimage

For many beginners,Skidded turns and beyond Articles learning to turn on a snowboard can be rather challenging and unnerving. The reason for this is that turning on a snowboard requires you to twist and turn is such a way that you feel like you are going to fall. Of course turning is absolutely essential to riding a snowboard and the feeling of loosing control goes away with time and practice.

A skidded turn and a linked skidded turn are one of the first turns that you should learn. There are several ways to make these turns on the slopes but the basics of the turns are the same. A skidded turn is a turn preformed while your snowboard is skidding across the slope. This is very useful for slopes that may have hard packed snow or ice.

First lets look at performing a basic skidded turn. Begin practicing your skidded turns on a slope that you are comfortable with. Ride down the slope with your knees bent slightly and face your shoulders in the direction that you wish to travel. As you ride down the slope pick a point where you will execute your turn. When you approach this point simply push your back leg out thus forcing your snowboard to skid along its side down the hill. Now shift your weight onto your front foot and you will begin to move in the direction that your snowboard is pointing.

While this is the basic procedure for a skidded turn, there are some finer points to keep in mind that will almost seem like another technique. When you are skidding down a hill raising one end of your snowboard to a higher angle than the other will also make it turn. The reason that this works is because the end of your snow board that has a higher angle will bite in to the snow a little harder than the other end thus causing that end to slow down and force the snowboard to rotate.

Another option that sometimes favored is the hip rotation technique. And begin by skidding down a hill. When you are ready to turn simply rotate your hips in the direction that you wish your snowboard to rotate. Rotating your hips will naturally cause your body to shift its weight to accomplish the turn and push the correct end of the snowboard in the direction that it needs to go to turn.

Which method is more correct depends upon you and what you wish to get out of snowboarding. The easiest option is the third way, to rotate your hips. The most technical way that also builds up skill for other maneuvers is the second way. The key is to know your riding style and to get out there and try each method to see what works for you.

When you are on the slopes practicing your turns you may also wish to practice a linked skidded turn. A linked skidded turn is the act of going from your skidded turn to another. One important point is to make sure that you allow a few seconds to travel before turning in the other direction. If you turn too quickly you run the risk of catching the downhill edge of your snowboard and bailing very fast.

Learning and practicing skidded turns are an essentially part of snowboarding and depending upon the style you prefer may help you with other tricks that you will soon be learning. Try each of the techniques mentioned here and learn to use each method regardless of what your favorite method is. This extra experience will make you more confident on the slopes and will round out your skills thus opening more doors later on when you are ready to try new tricks.