The best radio control helicopters gear

If you dare, it's a good challenge to try and tailor your radio control helicopters model, using the chart that accompanies this note. Today, this type of brake was replaced by the tire, which will be discussed in a subsequent issue. Read on to learn how to master each skill.

Surely more than once you had experienced the problem that the engine radio control helicopters carbide rebel, and finally check that the fault is yours, that the poor carburetor. Why?, And certainly when you transfer fuel to aircraft, then leave the container uncovered and there is the fatal combination, alcohol inevitably attracts moisture, trapping and will make your traveling companion, back and forth, increasing week after week until the problem arises.

Now, if you want to, you take a liter of fuel in a tightly closed container (or container, depending on your freezer) and place it in the freezer or freezer in your refrigerator. After a few hours, filter and in the drawing with a coffee filter and what you see in the form of little white balls in the filter, the water containing the fuel, and you will see that right now the engine goes. This ensures good radio control helicopters filtering.

If you enlarge the chamber, (axis) plastic wheel that you both like and do not want to stop using, you can supplement it with pop rivets, removing the nail that brings that kind of rivets. Then with the rivet that was empty, and of course to be internally the diameter of the rod train at the wheel before, with a wick will leave a hole that had been enlarged, the outer diameter of the rivet must be properly adjusted.

It is possible to change your radio control helicopters settings. Stay positive and ask for help. Many experts are out there. If you are a beginner, do not panic. Stat walking baby steps and enhance your model. We show you a simple working basis for this task, since the engine to be round is elusive. For that you can build a workbench of a small size.

You will then place the roll of tin, right base wire manufactured to withstand the hot soldering iron, and in the middle two tacos Leaning how to receive the engine and a piece of velcro on each side to hold it. This will change everything. The best part is, you will be able to weld radio control helicopters comfortably.