Environmental hazard warning signs

Jul 7
18:55

2021

peter main

peter main

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

There have been many anecdotal examples of dust explosions that have occurred in feed mills and grain storage elevators. Enquiries have found that the explosions tend to occur because there has been a buildup of dust that has been invited by some type of electrical spark, otherwise would probably not have caused much of a problem.

mediaimage

Hazard warning signs

Most people acknowledge hazard warning signs as being really useful,Environmental hazard warning signs Articles and often associate them only with areas of immediate risk or danger such as a spillage of fluid or material.

In fact, hazard warning signs can be used for a variety of reasons, both pro-active and deterrent, and can be highly effective if displayed properly, have a proper symbol and easy to use clear language.

Safety signs were originally designed to be applied to the machinery, to warn of potential risksand to advise how to use the machinery properly. They have since grown to a much wider use because of their effectiveness in very simply warning about non-machinery hazards and risks as well.

Thesafety alert symbol is perhaps one of the best-known signs in agriculture, construction and usage of industrial equipment. The symbol is widely used in an owners manual, and on all types of different hazard warning signs.

Its focus is to draw people's attention to the fact that there is a safety issue involved, which may then go on to be described in more detail, or advice given as to how best to handle it.

There are a huge variety of different types of warning signs that can be used in different circumstances, but most of them will have a number of standard features in common. They are likely to include the safety alert symbol, they are likely to warn a person not just about aparticular risk or potential risk, but also the degree of hazards associated with it.

Design is also likely to provide some degree of recommendations as to how to stay safe, or what actions to take to avoid the risk altogether, or minimises if it is not totally avoidable.

Colours are widely used to help focus the individual's attention on the degree of severity of the potential risk hazard. Generally speaking, red is used to signify the most serious risk, Orange will be used to signify a lower level of risk, and yellow is likely to be used when the sign is simply advising people to follow general safety instructions.

These colours will be around the outside of the sign, and on the margins inside as well. They act as a good leading to the nature of the sign, and are normally followed by some degree of picture or instruction giving more detailed information and instructions when necessary.

It is likely that where the sign is trying to show a really serious hazard or risk, most of the side is likely to be taken up with a picture that will give a fairly graphic example of the worst case scenario of how the risk could unfold.

This picture could simply be someone being struck by lightning, someone overturning a tractor, someone being electrocuted or someone getting entangled in a piece of machinery at this risk to their life or limb.

Perhaps the most common sign used people relate to it as an individual stripping on a piece of unknown liquid that is lying loose on the floor. this is a pretty good example of how a visual image when depicted simply can provide an instant image and understanding of what the potential risk or hazard is.