Tired Of sealing Problems? Opt For Impulsive Sealers

Impulse sealers help to measure and control package sealing temperatures. Did you know that choosing the proper sealer for every specific job is pretty essential? You choose the wrong one and your packaging operations come to a stop.

The basic types of impulse sealers are single impulse and double impulse. Single impulse units make use of a single piece of Ni-Chrome wire mounted either in the upper or lower portion of the sealer to create the desired seal. Single impulse units use either a flat wire element or a round wire element of different widths. Round wire elements are normally used for what is known as cut and seal operations as like working with shrink film. Flat wire elements are available in widths ranging from 1/8" to 3/8" with the 1/8" width being the most accepted by far.

Double impulse sealers are just what they sound like. These have an element in both the upper and lower portions of the machine. Double impulse sealers are usually used in the sealing of foil bags and other thick materials, usually up to 20 mils.

Impulse sealers are also hand operated. These units sit on top of a bench or table and are operated by lowering a hinged arm down to the material that is being sealed with one hand while, at the same time, holding the material with the other.

Foot operated impulse sealers work exactly in the same way, but these are freestanding units, which are mounted on a vertical tube and pedestal base. These sealers get activated by pressing down a foot pedal mounted on the front of the component. Being foot-operated, these allow both hands of the operator to remain free in order to move the product in and out of the machine, greatly increasing production rate.

Automatic impulse sealers, like the hand operated ones, are set on the top of a table or workbench, but once the timers are set properly these units will start operating automatically without any input from the operator. The timers control when the jaw of the machine closes. This makes these sealers the most consistent seals as it removes operator mistakes. Most of these kinds of sealers also provide a manual override switch that helps to make the unit cycle in between timer settings if required. Impulse sealers are generally built around the size of the element wire that is needed.

If you are looking for these sealers, you can find a lot of dealers selling them on the net. One such esteemed dealer is http://www.vanderstahl.com. Get in touch with them today, and you can rest assured they will have a solution to all your problems.