Work on an rc helicopter model on your own

You can create your own rc helicopter box and so on. Remember you need to work on the finishes. For instance, you can polish with paste, giving a good result of the drills. Apply this with a mini drill on all surfaces, giving a finish brilliant and a great finish. Try to work on the servo gas, too. You need to focus on the engine and the motor matter, too.

We can make single or double brackets with the dimensions that we need. In the market for aluminum brackets are of good quality, but at exorbitant prices, so our squad will have nothing to envy to those found in the market. We have made a double and hinge brackets since it is a basic model.

Servo gas

One of the drawbacks that we found when servo mounting a gas in some rc helicopter engines, it is your position or place of installation. In the case of large displacement engines and specifically in the ZDZ than 80 cubic centimeters and place twin servo positioning is quite problematic and after weighing different solutions I chose one which I think is pretty good and comfortable.

After having suggested the idea a friend and fellow flight the rc helicopter that carries more than 20 years, and without the hassle of pulling large wire lines because the servo is located in the engine itself, with the advantage of having a transmission very short and with little slack. It is important to:

-         Have full view of the engine with the throttle servo

-         Detailed view of the throttle servo mount

-         Another angle from which we can see this show

As we see the servo rc helicopter motor is coupled with a set and it enters and exits the nose of the plane next to it, without having to disconnect anything if the engine out of the frame flame.

The assembly is very simple from a piece of aluminum found in any workshop of aluminum windows we can get a piece. It can be bolted directly to the carburetor screws. The device is unproven, after the official rc helicopter test and corresponding flights you may determine whether it is good or not. If anything, try to ask for assistance. Find out if anyone has tested a similar situation. This will be extremely helpful. Do not worry, you will find your way. The world of rc hobby allows new alternatives. This is for certain!