4 Key Tips When Installing a Fiberglass Pool on a Sloping Site

Dec 12
19:51

2019

Nancy Whitman

Nancy Whitman

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

It doesn’t really matter if you have installed a fiberglass pool before or not. When you are doing it on a sloping site, it is a completely different ballgame. Then, you need to make sure that you are considering a couple of things that you normally would think is normal with installing a pool.

mediaimage

It doesn’t really matter if you have installed a fiberglass pool before or not. When you are doing it on a sloping site,4 Key Tips When Installing a Fiberglass Pool on a Sloping Site Articles it is a completely different ballgame. Then, you need to make sure that you are considering a couple of things that you normally would think is normal with installing a pool.

In order to make sure that you are building and installing a fiberglass pool on a sloping site, you need to make sure that you consider and remember these 4 key tips.

Plan your project beforehand

It is really important to make sure that you are planning your project beforehand. More than when you would with normal pool installation.

You need to make sure that you are considering the sloping are where you want to install the pool as well. Otherwise, you are going to end up with a huge mess, and your pool might not come out the way it should have. And, if you are doing this for a client, the last thing that you need, is to make a mess out of a project.

The excavation and layout of the fiberglass pool

With any fiberglass pool, you might know that you will need to have a flat surface. And, installing a pool on a slope isn’t going to give you a flat surface. This is why you should make sure about one thing when you are starting the excavation process.

That you are excavating the one side of the pool a lot more than the other side. You also need to make sure that the ground is level at the end of the day. So, that you can insert the fiberglass without having problems with the ground floor.

Ensure proper drainage

With any fiberglass pool, it is important to make sure that you are ensuring proper drainage. However, with a fiberglass pool that is built and installed on a slope, drainage is even more important.

This is why you should make sure that you know how to install drainage on a slope. It is quite different from normal drainage, because of the slope that is going downhill. Doing some research or getting some information about the drainage before you install it, is a great idea.

Every pool needs a deck. Even a pool on a sloping site

With a pool, you normally are building a deck around the pool as well. This is to make the pool look great and to make sure that no one is getting injured when they are playing in and around the pool. There are many different pool decks that you can install.

With a swimming pool that is built on a sloping site, the deck is still needed. However, you need to make sure that you are going to level the deck around the pool, in line with the pool’s height. This is the only way that you can be sure that the pool has a deck that will be corrected in line with the pool. Even, if this means that you need to excavate more around the pool to get the floor around the pool level as well. In fact, this is recommended.

With a fiberglass pool, installation isn’t as hard. But, the moment that you want to install the fiberglass pool on a sloping site, then you need to know that there are a couple of other things that you need to consider. These are the top four things that you need to consider so that you are going to install the pool correctly. And, to be sure that everyone will be able to enjoy the pool on a hot summer’s day.

Categories: