HEPA Filter Vacuums Are Easy to Use and Effortless to Change Filters - Find Out How Now!

The good news is that High Efficiency Particular Air filters in vacuums can restrain even the smallest dust particles, down to 0.3 microns in diameter, for about 99.97% at all times. These filters lock in dust mites, molds, smoke, pollens, and other allergens in the air. When you purchase one, you'll be delighted to realize that HEPA vacuum cleaners are utilized the same way conventional vacuums are being used. In addition, each unit comes with easy to follow guidelines on safety precautions and step by step guide on using the device. And like any other equipment in the market, these special filters require replacing, depending on their current conditions.
For normal indoor environments, the filters in HEPA filter vacuums should be changed every two to three years. Some vacuums may come with pre-filter aside from the primary filter, which catches larger air particles and inhibit them from obstructing the filter. The pre-filter should be replaced every three months. When you remove the pre-filter, you should also check the filter and its form and condition. If you notice a moldy smell from the HEPA filter when you power on the device, it's time to change it. If your house is situated in a dusty place, then it is recommended to replace the filter each year.
You may need the assistance of the owner's manual to locate the filter on your vacuum cleaner as well a screwdriver to unfasten the compartment. Prior to performing the next step you should put on a pair of disposable or latex globes. You should note that the chief purpose of filters is to remove and eliminate all kinds and forms of pollutants from the air, but they do not neutralize these elements in any way. You should also consider wearing a dust mask so you will not inhale the smallest particles that can reach even the deepest part of your lungs.
Unbolt the area where the filter is placed with the use of the screwdriver. Carefully lug it out and put it inside a garbage bag. Do not touch anything else. Use a cloth with bleached-based solution to wipe off any areas that may have been tapped by the old filter. You may also opt to clean down the outside of the filter's case with a disinfectant wipe.
Place the new filter in the vacuum carefully. Note that these filters are made of fiber glass, thus they are fragile and can be easily damaged. Close the compartment and dispose your mask and gloves. Don't forget to clean or wash your hands with sanitizer or disinfectant soap.