Types of Pumps in Burlington VT

May 9
19:24

2012

Gardner Wilkinson

Gardner Wilkinson

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

For the people residing in the city, getting potable water is not much of a problem as it is directly supplied to their homes and offices. The problem...

mediaimage
For the people residing in the city,Types of Pumps in Burlington VT Articles getting potable water is not much of a problem as it is directly supplied to their homes and offices. The problem arises for people living in villages, towns or other areas where water supply is a problem. Those owning farmhouses and growing crops and other stuff on the farmland will sooner or later need to figure out ways of getting a continuous ground water supply for drinking water as well as for irrigation purposes. As such, there is only one method by which you can get a regular supply of water from the ground and that is by making use of Pumps Burlington VT.

There are mainly two different types of Pumps that you can make use of, Submersible Pumps and Jet Pumps. These pumps will enable the water to be brought up to from the water table to the surface level.

Let us learn more about these Pumps Burlington VT.

The Jet Pump:
This is the commonly used water pump for extracting water from the ground. It is usually mounted on a wall near a water source and it uses suction to raise the water from the underground water table to the surface. The suction is created with the help of motor driven impeller which creates a centrifugal force to pull the water up. The water then goes through a series of tubes leaving behind a partial vacuum that forces it out in the form of a ‘jet.’ Hence the name jet pump. This type of Pumps Burlington VT are ideal for wells that are shallow but cannot be used in areas that have a deep water table. For these places, you will need to make use of a submersible pump.

The Submersible Pump:
These pumps are cylindrical in shape and long. The length of the pipes used depends upon the depth of the water table. It is basically made up of two different parts. One being the motor pump that is connected to an external electricity source and is controlled by a number of different wires. The other half is made up of motor impellers stacked one upon the other to create the centrifugal force. This is required for creating a suction and pull out water from beneath the ground.