Methods to pimp and scrim your rc helicopter

Dec 29
10:18

2011

ShoreAnthony

ShoreAnthony

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

We can paint and even scrim a rc helicopter. Many materials can be used. In the case of diluents, it is a glass bottle containing 100 ml also sells this prestigious manufacturer.

mediaimage

The application of a coating is not hard. Learn how to scrim your rc helicopter. You will need to follow easy steps:

Ø  Begin by saying that the whole process is "a stud" to make the stud I use cotton.

Ø  You will use gauze filling in special glaze stud.

Ø  Take a small amount of tunic and wrap with gauze making a kind ball half the size of his fist.

Ø  Make sure you will be tying them with their own dressing. Chiffon tunic can be found in shops specializing in painting,Methods to pimp and scrim your rc helicopter Articles I found it in Leroy Merlin.

Ø  We begin by cleaning the surface to be treated, leaving it free of dust and apply the span fix diluted slightly with diluents giving a very light coating of small stud (basically this first hand is made to leave the surface free of dust, the mixture must be made at a glass container and dip the stud itself and immediately apply it in circles, drying is almost instantaneous, but let dry at least 1 hour) and then sanded very smooth.

Ø  Clean the surface of dust and then repeat the process this time with the paper loaded, and also very soft sanding (the dilute phase spannfix in this sense is to soak the paper and not stick properly to the surface).

Ø  From here we repeat the process for your rc helicopter as many times as necessary but without diluting the span n fix now, sanding between coats.

I performed this process about 8 times for my own rc helicopter. The latest applications made with the same sanding machine sanding but preferably with an orbital sander.

We observe that the rc helicopter weight after the last application may increase a little extent since the span fix evaporates once the diluents is notable for its low weight. I did a little follow-up performed with electronic scales to check weight gain.

You can find a table of weights of a semi-trapezoidal gyro over a meter in length and a rope in a section of over 53 cm. giving a total area of 7488 cm. square or what is different about 1 m.

The scrim is almost pale in comparison with a traditional rc helicopter fabric-covered. Then the weight of the scrim over the finish in the absence of painting is 51 gr. There is no hurry since it is really a long and laborious procedure. Take your time and make it happen! 

Article "tagged" as:

Categories: