Silk or silky fabrics are difficult to handle during sewing. Here we discuss the problems with silk sewing and how to fix these problems. Here you can get some expert tips and tricks to deal with silky fabric on the sewing machine.
Sewing with slippery fabric is a challenging task for beginners. It would help if you had a proper thread for silk, a special needle, sufficient thread tension, and suitable stitch length. In this article, I am going to describe to you how to sew slip-proof fabric. I'm Mildred, and I love to help others with sewing problems. Before I go on, I won't talk about some of the issues with slippery sewing fabrics.
The first one was when you started to sew the seam; your fabric can get jammed into the actual needle throat plate. So, how to fix that problem? First, identify the root cause of this problem: a hole near feed dog, where the actual bobbin thread comes through. Your fabric can get jammed in that hole because it's quite slippery and soft, and so, therefore, that will cause the jamming. But another way to alleviate that problem is to get some sticky tape. You need a small piece and just put it over the hole; please don't put it on the teeth. Put your feet back on any threads to the back.
Another essential tip when you're working with slippery fabrics is fine silk pins. Ensure that you put your nails in parallel to the actual raw edge and within the seam allowance. So start sewing from the substantial edge, and that will help with the problem. If not, you can cook just a little bit into your work and start sewing from that point and pursue this result.
Next problem that you need to resolve when slippery sewing fabric is your stitch length. To sew silk without any trouble, you need the right stitch length. Moreover, you also need to make sure that you are on a lower thread tension. Make sure that when you take your work, you were not still in the same kind of mode when you did your last sewing project. Remember, you need a shorter stitch length and make sure the tension for your thread is slightly slacker.
Before start stitching, you do need to remember that you need the fine needle. You may use I stroke 70 and make sure that you have a fine thread that coats with the fibers within your silky slippery tight fabrics. The next thing to do before stitching is to ensure that your thread tension slacks at a lower number. Then you would typically have and also use a shorter length of the stitch. Don't pull pulley pins as you go along or mount.
Conclusion:
To work with silk or silky fabrics on sewing machines keep in mind these tricks. Always use size 9 or size 17 needles. Make sure you have a suitable thread for your actual circuit at materials, and you can get silk type in the line. When you come to silky sewing fabrics, remember that you can always put a tiny bit of sticky tape over the hole you find in your throat plate. Remember, you need a smaller stitch length and alter the thread tension, and you should be ok.
